Jio LYF 2403N Flash File Download

You will be able to download here Jio Lyf 2403N Flash File and Tool. If your Jio keypad phone becomes lazy or facing software errors then flash official firmware and fix the problem.

Jio 2403N feature phone comes with Qualcomm based chipset CPU, that,s why QFIL Flash Tool used to flash the firmware. Qflash Tool uses as an alternative method.

Before trying to download firmware check out the device information.

Product: Jio

Phone Name: Lyf 2403N

CPU Type: Qualcomm

Firmware Catagory: Stock ROM

Supported Tool: Qflash Tool, QFIL Tool

Download Lyf 2403N Flash File with Tool

As we recommended flash Lyf firmware using Qflash Tool or QFIL (Qualcomm Flash Image Loader). we will cover both the flashing method in this article.

Before starting the procedure be prepare for this process and download recommended Tools, drivers and Flash files.

  • Qualcomm USB Driver download and install.
  • Download Lyf LF 2403n Flash File
  • Qfil or Qflash Tool download links given below of the post.


  • Before trying to flash make sure Lyf phone battery must be at 50% charged, due to low battery percentage flashing process will damage.
  • Move or copy personal data, photos, contacts into PC drive.
  • Qualcomm USB driver installed completely for a better connection.

Flash LF-2403N using QFlash Tool

Qflash Tool is known as the most reliable Flash Tool to flash Jio 2403N Flash file tested. some of the user report that they are facing error while flashing the firmware.

Please follow below steps carefully to flash 2403n flash file without error.

  • First of all, install Qualcomm driver
  • Extract Flash Tool and firmware into PC
  • Copy Flash File folder and paste it into Qflash Tool folder
  • Follow location My PC> C Drive > Qflash Folder
  • Run Qflash Tool from desktop
  • Click on load content folder and browse the content file from the downloaded file.
  • Now its time to boot the device into EDL Mode
  • LYF 2403N Boot key is  Press Hold * key + # Key and Insert USB cable at the same time
  • when the device properly connected you will see Qualcomm HS-USB QDlooader 9008.
  • Finally Hit on Download and flashing will start.
  • At the end of successful flashing process done an OK message will appear.
  • Remove the device from PC and Power ON.

Jio 2403N Flash File using QFIL Flash Tool

  • Don,t forget to install Qualcomm Driver.
  • Extract QFIL Flash Tool and run the setup.
  • Open the Tool as a meta build mode.
  • Click on load content and browse the content file.
  • Boot devise into EDL mode by pressing and hold * key + # key and insert USB Cable same time.
  • Press Download button and flashing procedure will start.
  • Disconnect devise at the end of a successful flashing process done.

Conclusion: In this article, we have to cover How to flash LYF 2403N Flash File without errors.if you want to flash Jio LFY 2403N Flash File successfully then follow instructions step by step.

Read more: Itel A41 Plus Flash File

Like Other Software Tool


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: