How to Change the USB Port on Your Xiaomi 12S Ultra

Are you the proud owner of the Xiaomi 12S Ultra? If so, then this article will provide you with detailed instructions on how to change the USB port on your phone if it should become faulty or damaged somehow. This guide applies to all versions of the Xiaomi 12S Ultra and you don’t need any special equipment to complete the steps. Try it out!

Part 1: What you need

In order to change the USB port on your Xiaomi 12S Ultra, you will need a few tools. A Phillips head screwdriver, a case opener, and a new USB port. You will also need to disassemble your phone.

Part 2: Take apart the Mi Band 2

To change the USB port on your Xiaomi 12S Ultra, you’ll need to disassemble the device. With a small screwdriver, pry off the back cover. In the next step, you will need to remove the two screws holding the PCB in place. Carefully remove the PCB and locate the small black chip labeled USB. Gently heat up the chip with a soldering iron and then carefully remove it from the board. Finally, solder on a new USB chip in its place.

Part 3: Replace

You’ll need to disassemble your phone to replace the USB port. Start by removing the back panel and battery. Then, locate the small circuit board near the bottom of the phone. This is where the USB port is located. Carefully disconnect the old port and solder in a new one. Once you’ve done that, reassemble your phone and you’re good to go!

Part 4: Connect and try

4. Connect your device to the new port and give it a try. If everything works as it should, you’re all set! If not, don’t worry – there are a few other things you can try.

Part 5. Closing up

After you’ve taken the back cover off, you’ll see the battery. Gently pull it out and set it aside. Now find the screws holding in the motherboard. There are usually four of them, but depending on your phone model, there could be more or less. Unscrew these and set them aside with the battery. The last step is to unscrew the camera from its housing and unplug it from the motherboard. You can now put your new phone back together and enjoy your new USB port!

Leave a Comment